Continuous Access Port space1Media PageInvestors PageContact Us Pagespace2
menuspace1Isolation Sciences Home PageTechnology PageProductsContainment PageEnergy Conservation PageDistributors PageAbout Us Pagemenuspace1

The Continuous Access Port consists of two movable Continuous Access Ports on a track system which allow the ports to slide independently back and forth along a horizontal track integrated into a barrier film.  The barrier film mitigates the need for exhausting conditioned room air to the absolute minimum required by ANSI Z9.5-2010 standard and thus lowers facility energy costs. As side benefit, the Continuous Access Port also mitigates the release of fume hood contaminates into the laboratory from spill, splashes or energetic release. 

The Continuous Access Port, attached to the bottom of the fume hood sash, gives the technician all of the lateral arm movement and mobility that they have in a standard fume hood with the sash open but can significantly reduce the amount of laboratory room air that must be exhausted thru the fume hood to meet OSHA/ANSI safety regulations.

FHES

SPECIFICATION

The Continuous Access Port retrofit kit consists of the aluminum frame with a zipper track RF welded to the barrier polymer film and one pair of mobile Fume Hood Energy Saver:

  • FRAME

    • 0.75IN (1.87CM) Extruded Aluminum

    • Powder Coated

    • Fits 4ft – 5ft – 6ft – 8ft standard fume hoods

    • Custom size fume hoods [optional]

    • Attaches to the bottom of sash with Thumb Screws

  • BARRIER              

    • 6mil ‘water clear’ Polyurethane Film

    • Class A Flame Spread Rating

  • PORTS  

    • 4.75 (12.1cm) interior diameter

    • Slides on Nylon Zipper Track

    • One Pair of Ports per kit

    • Additional ports [optional]

  • SETUP   15 second Installation

FEATURES AND BENEFITS:

The Continuous Access Port has a competitive advantage – it allows one to operate a fume hood as if the sash was always in a closed position. This results in the least amount of laboratory air that must be exhausted to meet OSHA guidelines and ANSI safety standard.

Physical Barrier

  • Reduces the amount of facility conditioned air that must be exhausted to meet safety standards

  • Lowers the laboratory carbon footprint with the reduction of fume hood operational energy resulting in a more ‘Sustainable’ laboratory

  • Increases the laboratory facility IAQ by improving fume hood containment to minimize fume hood contaminates from escaping into the facility reducing exposure to laboratory occupants from accidental spills, splashes and air dynamics within the laboratory

Mobile Ports

  • Allows unrestricted and rapid access to the fume hood workbench area by having the operator move their arms back and forth through the barrier film with the fume hood sash in a ‘closed’ position.

Attachment

  • Attaches to the bottom of the fume hood sash to enable one to load and unload the fume hood by lifting the Continuous Access Port/Sash together.

  • Side wings slide into position to give stability during fume hood operation.

Download Our Brochure

Download our product and spec sheet for Continuous Access Port:

Download Brochure


Download Case Study

The BNMC case study illustrates the energy conservation and containment benefits of the Continuous Access Port

Download Case Study #1

Download BNMC Case Study


Download Price List

Download the Price List
for the CAP Retrofit Kit

Download Price List


Contact Isolation Sciences

Corporate Office
Isolation Sciences
170 South Cayuga Rd.
Williamsville, NY 14221

Research and Development and Manufacturing
Isolation Sciences
79 Fillmore Ave.
Tonawanda, NY 14150

Contact Us
716.984.9220 - Tel
716.694.3026 - FAX
Email:
[email protected]


About Us


Home | Technology | Products | Containment | Energy Conservation | Distributors | About Us
Media | Investors | Contact Us

Continuous Access Port and Fume Hood Energy Saver are trademarks of Isolation Sciences
Copyright © 2011 Isolation Sciences LLC